24/7/365
Your machines don’t sleep.
Neither should your sensors.
Industrial Monitoring Sensors—rugged, hermetically sealed, hazardous-area approved. Built for permanent installation on rotating machinery in the harshest plant environments.
Plant Status
4 sensors · continuous data · straight to your PLC
−65°
to +500°F operating range
IP68
hermetically sealed housings
ATEX
FM, CSA & IECEx approved
4–20
mA direct to your PLC/DCS
The Range
Choose your monitoring level
From basic vibration detection to full-spectrum continuous monitoring—build the system your plant needs.
Industrial Vibration Sensors
Rugged ICP® accelerometers for permanent installation. Low-cost, precision, multi-axis, high temperature, cryogenic, and hazardous area models.
4–20mA Vibration Transmitters
Loop-powered transmitters output proportional 4–20mA directly to your PLC or DCS. Reciprocating protectors, DIN-rail modules, and bearing monitors.
Vibration Switches
Automated machinery protection with adjustable trip points. USB-programmable smart switches, electronic relay output, and mechanical emergency shutdown.
Industrial Pressure Transducers
Dynamic pressure sensors for hydraulic, pneumatic, and process monitoring. Rugged housings with high-overload protection for industrial environments.
Specifications
Quick Comparison
| Parameter | Vibration Sensors | 4–20mA Transmitters | Vibration Switches |
|---|---|---|---|
| Measurement | Acceleration (g) | Velocity (in/s or mm/s) | Velocity (in/s) |
| Frequency Range | 0.5 Hz – 15 kHz | 10 Hz – 1 kHz | 10 Hz – 1 kHz |
| Output | ICP® (100 mV/g typical) | 4–20 mA proportional | Relay / SPDT contact |
| Temperature Range | −65°F to +250°F std. | −40°F to +185°F | −40°F to +185°F |
| Housing | Stainless steel, hermetic | Stainless steel, IP67 | Stainless steel / aluminum |
| Hazardous Area | FM / ATEX / IECEx models | FM / ATEX available | FM / CSA available |
How It Works
From sensor to decision
Install
Mount industrial sensors directly on bearing housings, motor frames, or machine casings. Stud mount, adhesive, or magnetic—stainless steel housings survive oil, water, and vibration.
Monitor
Continuous 4–20mA or ICP® signals feed directly into your existing PLC, DCS, or condition monitoring system. No special software required—the data flows into what you already use.
Alert
Set alarm thresholds in your control system. When vibration trends upward, your team gets notified. Vibration switches can trigger automatic shutdown to protect critical machinery.
Act
Schedule maintenance on your terms. Replace bearings during planned outages, not emergency shutdowns. The data tells you what needs attention and how urgent it is.
Continuous Protection
Your machines are running. Are you listening?
We’ll help you design a monitoring system that fits your plant, your machines, and your existing infrastructure.